Epson PowerLite Home Cinema 640 Home Theater System User Manual


 
Projection Modes
Depending on how you positioned the projector, you may need to change the projection mode so your
images project correctly.
Front (default setting) lets you project from a table in front of the screen.
Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.
Rear flips the image horizontally to project from behind a translucent screen.
Rear/Ceiling flips the image over top-to-bottom and horizontally to project from the ceiling and behind
a translucent screen.
Changing the Projection Mode Using the Remote Control
Changing the Projection Mode Using the Menus
Parent topic: Using Basic Projector Features
Changing the Projection Mode Using the Remote Control
You can change the projection mode to flip the image over top-to-bottom.
1. Turn on the projector and display an image.
2. Hold down the A/V Mute button on the remote control for five seconds.
The image disappears briefly and reappears flipped top-to-bottom.
3. To change projection back to the original mode, hold down the A/V Mute button for five seconds
again.
Parent topic: Projection Modes
85