Filter
Top Products
(IP2042/QS) January 2006 2
Introduction
What is this Quick-start?
This Quick-Start is for anyone who has to install and commission the MSP-ULOG1 or MSP-ULOG2 ultrasonic system, and
does not need in-depth information.
For full installation instructions, you must refer to the installation (IM) manuals supplied with the equipment.
What are these MSP-ULOG1 and MSP-ULOG2 systems?
They are level, contents, or flow measurement and control systems. Typical applications include wet well level (and pump)
control, tank contents measurement, and open channel flow measurement.
The system comprises a mains or DC powered MCULOG control unit, an MSP900SH ultrasonic transmitter with a mounting kit,
and manuals. MSP-ULOG1 has the wall-mounted version of the MCULOG; MSP-ULOG2 has the panel-mounted MCULOG.
Figure 1: MCULOGW – wall-mounted Figure 2: MSP900SH Figure 3: MCULOGP – panel-mounted
About the MCULOG Control Unit
The MCULOG unit is a member of the MCU900 family of control units. It has:
• Full support for a single MSP900SH ultrasonic transmitter – measuring level by default
• a 4-line LCD display with back light – displays both text and graphical information
• a 6 button keypad
• an LED indicator
• an intuitive menu system – for setting up
• 2 digital inputs (voltage-free contacts) for triggering various activities (e.g. displaying a message)
• 5 relay outputs (e.g. for controlling pumps, indicating alarms, etc.)
• a 4-20mA output
• a 4,800 event logging capability.
All setting up is achieved from the front panel of the MCULOG control unit.
About the MSP900SH Ultrasonic Transmitter
This is a loop-powered transmitter, factory sealed and fitted with cable ready to install on aqueous applications. The transmitter
is pre-configured to measure liquid level and communicates values to the MCULOG.
The other manuals
The following manuals are supplied along with this Quick-start manual:
MCULOG:
Installation manual (IP2030/IM)
Safety instructions (IP2030/SI)
MSP900SH:
Installation manual (IP2040/IM)
Safety instructions (IP2040/SI)
Full operation manuals IP2030/OM and IP2040/OM are available on request from Mobrey Measurement, and are available on the
web at www.mobrey.com