Filter
Top Products
January 2006 (IP2042/QS) 11
Relays
Relay outputs 1 to 4 are normally On Point/Off Point relays which may be used to start/stop pumps. They normally energise at
one level and de-energise at a different level.
Alternatively, they may be programmed as out-of-limits alarms such that they are energised between defined points and will de-
energise outside the defined limits. They may also be programmed to perform a variety of auto-sequences and auxiliary
functions, such as logging a memory nearly full alarm.
Relay output 5 is normally a fail safe fault relay but may be re-allocated to another duty.
Relays can be set-up easily using the Relay Wizard, accessible by navigating to the RELAYS menu screen.
Navigating to the RELAY Screen
Relay (RL) Status
The relay status icons on the primary display have the following meanings:
= energised Relay is presently energised.
0 = de-energised Relay is presently de-energised.
A = Alarm All active alarms can be viewed by parameter D831.
S = Sampler Relay is allocated to sampling duty.
T = Totalising Relay is allocated to totalising duty.
Comfort (System) Settings
The SETTINGS menu allows adjusting of the time and date, switching off the keyboard sound and changing language.
Navigating to the SETTINGS Menu