Filter
Top Products
35
1.) Select the proper insert for your particular iPod
®
model from the “Chart” and
place the insert in the docking area as shown.
If you are using one of the 30GB or 60GB (5G) iPod
®
s with video capability, or
the (2G) iPod
®
nano use the inserts that were included with the iPod
®
s when
you bought them.
2.) Set the HOLD switch of your iPod
®
to the “Off” position to unlock the click-
wheel navigation controls.
3.) Place your iPod
®
into the insert in the
docking area and make sure that it is
fully seated on the connector.
4.) Press the iPod/Shuffle button on the top cabinet of this system, or on the
remote control, to turn the Power on.
NOTE: It is not necessary to press the Power button first.
5.) The display will show either the “iPod”
or “iPodShuffle” indicators.
Press the iPod/Shuffle button Until the display is showing “iPod”.
NOTE: The display indicator must match the type iPod
®
you are using
or no sound will be heard.
iE600_050407.p65 4/5/2007, 11:5035