Filter
Top Products
10
The original battery should be able to power the remote control for 12 to 18 months
or even longer, depending on the frequency of use. When the operation of the
remote becomes intermittent or fails completely you should replace the battery as
soon as possible.
To replace the battery, put the remote control face down and press the battery
holder locking tab in the direction of the arrow and slide the battery holder out of
the remote control.
Install a fresh CR2032 battery in the holder as shown and slide the holder back in
to the remote control.
IMPORTANT: Be sure to dispose of the old battery properly. Do not leave it
around where a young child or a pet might play with or swallow it. If the battery
is swallowed, contact a physician immediately. Do not dispose of the old battery
in a fire. The battery could leak or explode if incinerated.
CAUTION
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
CR2032
iE600_050407.p65 4/5/2007, 11:5010