Filter
Top Products
29
Programmed Playback
The Programmed Playback feature allows you to program a total of up to 16 tracks
in any desired order. You may program the same track to play several times within
a program sequence if desired.
Note: You cannot program tracks during playback. If a disc is playing press
the STOP button first to stop playback before beginning the programming
steps below.
1.) Load the disc in the player and wait until the player has read the Table of Contents
of the disc.
2.) Press the MEMORY button.
The MEMORY indicator will appear and
the display will show Track “– –” and
Program Memory “Pr-:01”.
3.) Then press the or buttons to selectct
the first track on the disc to be
programmed.
(Example: Track 07).
4.) Press the MEMORY button again to enter
Track 07 in program memory #1.
The program memory number advances
to “Pr-:02”.
5.) Repeat steps 3 and 4 selecting the desired Track number each time until you
have entered up to 16 tracks in the CD program memory.
Note: You may also select the track numbers directly with the 1-9 number
buttons on the remote control.
• For tracks 1 through 9 simply press the corresponding number button.
• For tracks 10 and higher first press the “+10” button and then the
corresponding button for the second digit.
For example, for track 12, press “+10” and then press “2”.
ES920_102104.p65 21/10/2004, 12:0629