Emerson ES920 Stereo System User Manual


 
19
Notes:
After pressing the MEMORY button to begin setting the clock, you must press
the or buttons to adjust the display within 6 seconds, otherwise the digits
stop flashing and the time cannot be adjusted.
If this occurs, press the MEMORY button again and then press the or
buttons within 6 seconds to adjust the display.
The display will always show the time when the system is in the Standby (Power
Off) mode.
To display the time while the system is in the AUX (LINE), TUNER or CD (Stop)
mode, press the MODE button on the front panel or remote control once.
ES920_102104.p65 21/10/2004, 12:0619