Emerson ES920 Stereo System User Manual


 
16
Volume Controls
To increase or decrease the system volume press the VOLUME + or buttons on
the front panel or the remote control.
The Volume Level Indicator will appear on the
display when you change the volume level.
The level indicator ranges from 00
(Minimum) to “40(Maximum).
The system remembers the volume level when the power is switched Offand
automatically returns to the same level when the power is switched Onagain.
Electronic Preset Equalizer (EQ)
The preset equalizer allows you to adjust the sound characteristic for the most
popular types of music.
Press the EQ button on the front panel or the
remote control to cycle through the following
equalizer settings: Flat (EQ Off), ROCK,
JAZZ, POP or CLASSIC.
The appropriate EQ indicator appears in the display to confirm your selection. The
system remembers the EQ setting when the power is switched offand returns to
the same setting when the power is switched onagain.
FM ST/MONO Button (On Remote Control Only)
If you are listening to a weak or distant FM stereo station you may be able to
improve the reception by pressing the ST/MONO button to select the FM Mono
mode.
The ST indicator will go off. The reception will
normally improve but the sound will no longer
be in stereo.
ES920_102104.p65 21/10/2004, 12:0616