Filter
Top Products
19
After the program has finished playing, the CD stops and the MEMORY indicator
starts flashing again. This indicates that the program remains in memory. Press RP
button to play the program again.
• To set the program to repeat continuously, press REPEAT button so that
REPEAT ALL indicator appears in the display.
(To cancel repeat, press REPEAT button so that REPEATindicator disappears.)
Changing The Program
The disc must be stopped to make any program changes.
• To change a track, press MEMORY repeatedly (until the required P- number is
displayed) then press B or F to change the TRACK number.
• Press MEMORY to finish changing the track.
• To delete a track, press MEMORY repeatedly (until the required P- number is
displayed) then press B or F to change the TRACK number to 00.
• Press MEMORY to finish deleting the track.
• To add a track, press MEMORY repeatedly (until TRACK00 is shown) then use
B or F to select required TRACKnumber. And press the MEMORY button
to add it to the program.
• To erase the program from memory, press the STOP button or open the CD door.
ES2_ib041503.p65 15/4/2003, 9:3619