Filter
Top Products
18
Programmed Playback
You can program the unit to play up to 60 tracks on a disc in any desired order. The
same track may be programmed several times if desired.
Notes:
• The player must be stopped in order to program a disc. If the disc is playing,
press the STOP button before you begin the programming steps below.
• To cancel programming at any time, press the STOP button.
1. Load the disc and close the CD door.
2. Press MEMORY button on touch panel or
remote control. The MEMORY indicator
flashes in the display and the display
also shows ‘P-01’.
3. Press B or F to select the first
TRACK number to be programmed.
(Example: Track 8)
4. Press the MEMORY button to enter the
track ‘8’ in program memory #1. The track
number advances to ‘P-02’
5. Repeat steps 3 and 4 to enter up to 60 tracks in the program memory.
• You can check your program by pressing MEMORY repeatedly. As P-01,
P-02advances, check the displayed track numbers.
(Note: After the final track, the display shows FULL, and pressing MEMORY
again will return to the first track.)
6. Finally, press RP to play the programmed tracks.The MEMORY indicator will
stop flashing indicating that the CD is playing in programmed mode.
MEMORY
MEMORY
MEMORY
ES2_ib041503.p65 15/4/2003, 9:3618