Emerson ES20 Stereo System User Manual


 
31
SLEEP TIMER (Front Panel Only)
This system includes a programmable Sleep Timer that allows you to fall asleep to
between 10 and 90 minutes of music and then shuts the power Offautomatically.
To Operate The Sleep Timer:
1.) Turn the system Onand operate either the Tuner or CD function as usual.
2.) Adjust the MAIN VOLUME and VARIABLE BASS VOLUME level controls to
the desired level. Remember that the level you select for the sleep to music
function is the same level you will hear when the timer turns the system on in
the morning.
3.) Press the SLEEP button on the front panel. There is no SLEEP button on the
remote control.
4.) The display will show 90indicating that the sleep timer will shut the power off
after 90 minutes. Continue pressing the SLEEP button to decrease the amount
of sleep timer operation. Each
time you press the SLEEP button
you reduce the sleep time by 10
minutes. Release the SLEEP
button when the display shows
the desired amount of Sleep timer operation.
5.) After a few seconds the Sleep
Time display disappears and the
normal Tuner or CD display
returns. When the Sleep Timer
counts down to 00, the power
shuts off automatically.
Notes:
You can shut the unit off manually before the Sleep Timer counts down to 00”
by pressing the STANDBY/ON button at any time.
Remember that if you are falling asleep to CD you will also wake to CD, and if
you fall asleep to the radio you will also wake to the radio.
If you are falling asleep to CD, the system will only operate until the CD ends.
If you set the Sleep Timer for 90 minutes but your CD is only 45 minutes long,
the music will stop after 45 minutes.
ES20_ib061303.p65 13/6/2003, 12:1331