Filter
Top Products
26
PROGRAMMED PLAYBACK
This system has a 20 track programmable memory. You can program up to 20
tracks on a disc to play back in any desired order.
Note: You cannot program the player while a disc is playing. You must press
the STOP button first to stop playback before beginning the programming
steps below.
1.) Load your disc as usual and wait until the display shows the total playing time
and number of tracks.
2.) Press the MEMORY/TIME ADJ.
button on the front panel or the
remote control. The MEMORY
indicator flashes and the display
show track number “01” and
program memory number “P – 01”.
3.) Press the SKIP/SEARCH CONTROLS ( / ) on the front panel of the main
unit or the remote control to select
the first track you wish to
program. Example: Track 7.
4.) Press the MEMORY/TIME ADJ.
button again to enter Track 7 in
Program Memory 01. The
Program number advances to P - 02 and the track display shows “00”.
5.) Repeat Steps 3 and 4, selecting a different track number each time until you
have entered up to 20 tracks in the memory.
ES20_ib061303.p65 13/6/2003, 12:1326