Emerson ES20 Stereo System User Manual


 
17
LISTENING TO THE RADIO
1.) Press the STANDBY/ON button on the main unit or the remote control. The
main display turns on.
2.) If necessary, press the TUNER button on the front panel of the main unit or
the CD/TUNER button on the
remote control to select the Tuner
function. The display will show an
AM or FM station frequency. To
select a different band, press the
STOP/BAND button.
3.) Tune to the desired frequency as follows:
Manual Tuning
Repeatedly press the TUNING/SKIP-SEARCH UP or DOWN buttons
on the front panel of the main unit or on the remote control until the frequency
of the desired station appears on the display.
Automatic Tuning
Press and hold the TUNING/SKIP-SEARCH UP or DOWN buttons on
the front panel of the main unit or on the remote control until the display begins
to move, then release the buttons. The tuner will search up or down the band
for the next strong station and stop on that station. Repeat this procedure until
the tuner stops on your desired station.
4.) Adjust the VOLUME controls as desired. Also adjust the VARIABLE BASS
VOLUME level control on the front panel of the Amplifier/Subwoofer unit.
5.) If you tuned to an FM Stereo station the STEREO indicator will appear in the
main display. If the reception is
noisy or weak, set the MONO/
STEREO switch on the top panel
of the Tuner/CD Player unit to the
MONO setting. The STEREO
indicator will disappear. The reception will normally improve although the sound
will no longer be in stereo.
6.) When you are finished listening press the STANDBY/ON button on the main
unit or remote control to return to the STANDBY (Power Off) mode. The main
display goes off and the time display reappears.
ES20_ib061303.p65 13/6/2003, 12:1317