Emerson ES1 Stereo System User Manual


 
14
PLAYING COMPACT DISCS
Normal Playback
1. Press the Power button to turn the system ‘On’.
2. Press the Open/Close
button to open the motorized CD door. The display will show ‘OPEN’
as the door opens.
3. Place your CD on the center spindle with the printed label side facing ‘up’.
4. Press the Open/Close
button again to close the motorized CD door. (Do not try to close the
door by hand.) The display will show ‘CLOSE’ as the door closes. If the system was in the CD
mode the player will read the disc and display the total number of tracks and the total playing
time of the disc. If the system was in a different mode (Tuner or Tape/Aux) the display will show
the last mode selected.
5. Press the Play/Pause
button to begin playback. The display will briefly show ‘Cd’, then display
the total number of tracks and total playing time, and then playback will begin on Track 1 and the
display will show the elapsed playing time.
6. After the last track has played the player stops and the display again shows the total number of
tracks and total playing time of the disc. If you are finished listening, press the Open/Close
button to open the door and remove your disc. Press Open/Close again to close the door,
then press the Power button to shut the system ‘Off’.
Pause Function
To pause during CD playback, press the Play/Pause
button again. The Pause indicator
appears in the display and the time display flashes. The CD continues to spin but no sound is
heard. To release pause and resume playback, press the Play/Pause
button once more. The
pause
indicator disappears and playback resumes at exactly the same point on the disc.
Stop Function
To stop playback before the disc ends, press the Stop
button at any time. The disc stops and the
display again shows the total number of tracks and the total playing time on the disc.
Skip Track and High Speed Music Search Functions
Note: The Up and Down buttons are used for the Skip and Search functions.
To skip to a different track during playback press the Up
or Down button on the top panel until
the desired track number appears on the display. Playback will begin on the track you selected.