Filter
Top Products
Reference Manual
00809-0100-4514, Rev BA
January 2008
Rosemount 1154
6-10
Spare Parts Category
(3)
Traceable Part
Quantity Required
Item Number
Rosemount
1154DP
Rosemount
1154HP
Rosemount
1154GP
Part Description Order No. Order No. Order No.
Electronics Assembly Hardware
Electronics Screw (3)
Nameplate Screw (2)
Locknut
7
9
1 A 01153-0040-0001 01153-0040-0001 01153-0040-0001
Jumper Wire Kit (36 in.) 01153-0055-0001 01153-0055-0001 01153-0055-0001
Bolts and Nuts for Process Flange
(3)
Range Codes 4–8 (Pkg of 4)
Range Code 9 (Pkg of 4)
Range Code 10 (Pkg of 4)
14/8
1
1
1
X
X
X
01153-0245-0001
—
—
01153-0245-0001
—
—
01153-0245-0001
01153-0246-0001
01153-0246-0002
Panel Mounting Bracket with Bolts
Universal Mounting Bracket with Bolts
Bolts and Washers for Bracket (Pkg of 4)
1 01153-0013-0001
01153-0013-0003
01153-0321-0001
01153-0013-0001
01153-0013-0003
01153-0321-0001
01153-0013-0001
01153-0013-0003
01153-0321-0001
Pipe Mount Bracket Kit (Adapters)
Pipe Mount Bracket Kit
(Bracket and Adapters)
01154-0044-0001
01154-0038-0002
01154-0044-0001
01154-0038-0002
01154-0044-0001
01154-0038-0002
Conduit Elbow (M22)
Conduit Elbow (½–14 NPT)
01154-0035-0001
01154-0040-0001
01154-0035-0001
01154-0040-0001
01154-0035-0001
01154-0040-0001
Amplifier Circuit Board, Output Code R,
N0026
(4)
6 01154-0001-0006 01154-0001-0006 —
(1) Rosemount recommends one spare part or kit for every 25 transmitters in Category “A,” one spare part or kit for every
50 transmitters in Category “B,” and one spare part or kit for every 5 transmitters in Category “C.”
(2) Two flanges are required per transmitter. Flange parts depend on desired connection and transmitter type.
(3) Each spare parts kit contains the correct number of nuts, bolts, and washers for the specific transmitter range code it is
designated for. Due to consolidation of parts kits, the bolt length and quantity of washers required may differ from
existing transmitter assemblies and/or parts kits. Verify by part number that the appropriate spare parts kit is used for
the transmitter range code being re-assembled. Contact Rosemount Nuclear Instruments, Inc. if there are questions.
(4) For use with existing N0026 transmitter only.