Filter
Top Products
Radio Reception
15
Select the TUNER mode by turning the FUNCTION selector.
1
Select the station you want to listen to (auto selection).
4
Hold down the TUNING button for 0.5 to 2 seconds.
When a station is tuned in, the tuning process will stop
automatically.
Press the TUNING button to stop the auto selection.
< Selecting stations which cannot be tuned automatically
(manual selection)
Press the TUNING button repeatedly or hold it down and
release it when the station you want to listen to is found.
When the TUNING button is pressed momentarily (0.5
second or less), the frequency changes by a fixed step.
< "STEREO" is displayed when a stereo broadcast is tuned in.
< "TUNED" is displayed when a broadcast is correctly tuned
in.
FM:
50 kHz steps
AM: 9 kHz steps
Press the MODE (TUNING) button to change to TUNING
mode.
The "PRESET" indicator disappears from the display.
< This button is used to select Tuning or Preset scan mode.
3
Select the AM or FM by pressing the BAND button.
2
3
4
2
1
Radio Reception (1) Radio Reception (2)
FM MODE Button
Pressing this button alternates between Stereo mode
and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the
STEREO indicator lights in the display. If FM
broadcasts with weak signal strength are received, the
FM muting function works automatically to cut the
signals, eliminating loud noise.
Mono
To compensate for weak FM stereo reception, select
this mode. Reception will now be forced monaural,
reducing unwanted noise.
A
A