Filter
Top Products
1.SHOW1~8 buttons: To playback Show1-8 in the relative page which you wish to playback shows in
Manual Mode.
2.SHOW Indicators: To indicate the corresponding SHOW activity and state, its indicator will illuminate in the
Manual Mode when the selected show is engaged.
3.PAGE1~4 buttons: To access your desired pages which you wish to playback your desired shows.
4.PAGE Indicators: Its indicator will illuminate when your desired page is engaged.
5.AUTO/MANUAL button: Access to Auto or Manual function mode.
6.AUTO/MANUAL Indicator: The red indicator indicates the Auto function mode has been engaged currently
and the blue one for the Manual function mode.
7.OFF button: To close the current Show in Manual function mode.
8.OFF Indicator: The desired show has been closed when OFF indicator illuminates.
9.MASTER UP button: Continuously tapping this button, allows to increase the intensity of overall output.
10.MASTER DOWN button: Continuously tapping this button, allows to decrease the intensity of overall
output.
11.Infrared Sensor: To receive infrared remote signals.
12.USB Port: For communication to PC.
13.DC Input port: Plug an external AC Adaptor (DC9~12V 500mA).
3.5 Product Descriptions
19''/1U rack mount(Keypad),
USB port to communication with PC for linking use
Allows to convert the edited flash file(.swf) into file (.scn) and record in AR-32RM, create a new scene.
As a real-time recorder, allows external DMX signal to convert to flash file(.scn) and record in AR-32RM.
Built-in real time clock & calendar allows to edit events and set triggering time for each SHOW.
Up to 248 files but not over 128M recorded in memory to control DMX signal files.
Allows up to 32 Shows can be created and assigned by customizing flash scenes with DMX address
setting and fadetime selection by performing AR-32 configuration software with your computer.
DMX Controlling Mode and Time Trigger Mode and Manual Mode available for playback shows.
Infrared Remote functions (AR-32 Remote included).
Power Failure Memory.
Architectural Show System
Providing
3.4 Main Features
Page1
Page2
Page3
Page4
POWER
USB
DMXIN
Show1
Show2
Show3 Show4 Show5
Show6
Show7 Show8
MasterUP
MasterDOWN
OFF
AUTO(Manual)
IR
ArchitecturalShowSystem
1=Ground
2=Data-
3=Data+
AR-32RM
3
3
3
2
2
2
1
1
1
PUSH
PUSH
PUSH
1
1
1
2
2
2
3
3
3
SerialNumber:
MadeinPRC
DCINPUT:
9-12VDC,500mA Min
EXT.
RemoteIR
DMXOUT
1=Ground
2=Data-
3=Data+
1
2
3
41057111214
968
13
15
16
14.DMX In: To receive DMX signal via 3-pin XLR male connector.
15.DMX Out: To output DMX signal via 3-pin XLR female connector.
16.EXT.RemoteIR:Usetoplugtheextrainfraredremotesensor.
for the latest manual revisions.
3
8
Black out function (When the recording data is "0", the data will be ignored without preserving).