Filter
Top Products
33
MANUAL (STATIC)
If your broadband modem/router is not compatible with DHCP
(Dynamic Host Confi guration Protocol), or you wish to manually
confi gure the Network Confi guration and IP address, press OK to
select the Network Confi guration option.
Use the or buttons to change the confi guration to “Static” and
for each of the addresses in turn (IP Address, Subnet Mask, Router
Address, and DNS Address) press to highlight the address and
then the red button to edit the address.
Highlight each of the four “octets” that is to be changed, enter
the number required using the number buttons, and press OK
to confi rm that address. When all four addresses have been set
correctly, press OK to set the confi guration and return to the
system menu page.