Filter
Top Products
28
SOUND MENU SECTION (continued)
LIP-SYNC DELAY
If you are using the S/PDIF output with a sound system and find
the sound and picture falling out of sync, you can delay the sound
output by a small amount to compensate.
Press OK to show the lip-sync delay menu on top of the normal
TV picture, then use the and buttons to adjust the amount of
audio delay in 10ms steps from 0-250ms. Press OK to confirm
your choice and return to the sound menu.
BALANCE
You can alter the volume balance between the left and right stereo
sound outputs by pressing OK to show the balance menu and using
the or buttons to alter the balance in favour of the right side
(positive) or left side (negative). Press OK to confirm the setting.
TIME MENU SECTION
Highlight the option you want to alter using the and buttons.
When you have finished making the changes you want, leave the
menu system by pressing BACK or EXIT.
AUTO STANDBY
To conserve power, the Plaza HD•T2 will switch to standby after
three hours if no buttons are pressed on the remote control or
front panel. The Auto standby function is normally turned on, and
can be turn off by pressing the OK button.
SLEEP TIMER
Press OK to show the sleep timer menu and use the and buttons
to choose a time up to 90 minutes after which the receiver automatically
switches itself to standby. Press OK to confirm your choice.