Filter
Top Products
7
ENGLISH
Turning power on
Press POWER to set it to “hON”.
The “33”
indicator
on the surface of
SPEED
lights in amber.
If the player is not to be used for extended period, be sure to
disconnect the power cord.
Playback
1
Place a record on the turntable.
For EP (“doughnut”) records, use the included 45 rpm adapter.
2
Set the record’s playing speed, using SPEED.
Each time SPEED is pressed, the “45” or “33” indicator on
SPEED lights alternately.
• “45” indicator (green): The turntable rotates at 45 rpm.
• “33” indicator (amber): The turntable rotates at 33-1/3 rpm.
3
Press START/STOP .
The turntable starts turning.
4
Raise the lifter lever and holding the head shell’s
nger catch move the tone arm to the beginning of
the selection you want to play.
5
Lower the lifter lever.
The tone arm lowers the stylus tip slowly onto the record and
playback starts.
NOTE
• Be careful not to scratch the record.
• During playback, pay special attention to the points described below.
• Do not touch the tone arm or turntable.
• Do not turn the power off.
• Do not apply vibration or shock to the player.
• To change the record, replace it after the turntable stops.
• Do not try to stop the turntable forcibly while it is rotating. The inside
of the turntable may become hot and it may cause malfunction or
fire.
Stopping playback
1
Raise the lifter lever slowly.
The tone arm raises and the stylus tip removed from the record.
2
Return the tone arm by holding the head shell’s
nger catch to the armrest.
3
Lower the lifter lever.
4
Fix the tone arm to the armrest.
5
Press START/STOP.
The rotation of the turntable stops.
NOTE
To protect the stylus tip of the cartridge, attach the stylus cover when
the player is not to be used.
Operation
6
Head shell
Tone arm
POWER
Turntable
SPEED
START/STOP
Lifter lever
1.DP-A100E3_ENG_004_0825.indd 7 2010/08/26 8:59:09