Denon DN-C630 CD Player User Manual


 
22
ENGLISH
(3) Detailed Description of Preset Functions
(* = initial setting)
1) “Preset Type (*)” (Three different sets (types) of presettings can be made and used for different purposes.)
* Preset Type 1 : Set to preset type 1.
Preset Type 2 : Set to preset type 2.
Preset Type 3 : Set to preset type 3.
2) “Finish (*****)”
Finish Stop : Stop mode is set after playback ends.
* Finish Next : Standby mode is set at next track after playback ends.
Finish Recue : Standby mode is set at playback start position after playback ends.
3) “Power On (****)”
* Power On Stby : Standby mode is set at specified track after TOC is read.
Power On Play : Playback begins in the all repeat mode after TOC is read.
Power On Stop : Stop mode is set after TOC is read.
4) “CueDet. (–**) dB”
CueDet. (–*) dB : Set the audio detection level for cueing. (–72/–66/*–60/–54/–48/–42/–36)
CueDet. OFF : Sound startup position is not cued.
5) “Sleep ON (OFF)”
* Sleep ON : Automatically turn the servo functions off if no button is operated for 30 minutes in the pause, standby
or manual search mode.
Sleep OFF : Do not automatically turn the servo functions off.
6) “Program 1 OFF (ON)”
Program 1 OFF (ON) : Store the contents of program 1 when on. (Initial setting - OFF)
7) “Progam 2 OFF (ON)”
Program 2 OFF (ON) : Store the contents of program 2 when on. (Initial setting - OFF)
8) “Program 3 OFF (ON)”
Program 3 OFF (ON) : Store the contents of program 3 when on. (Initial setting - OFF)
9) “Subcode ON (OFF)”
Subcode ON : Output subcodes with the digital output signals. (consumer SPDIF format)
* Subcode OFF : Do not output subcodes with the digital output signals. (consumer IEC 958 Type I format)
NOTE: 0 sec. start is not possible when the above is set to “Subcode ON”.
10) “End Mon. (**) s”
End Mon. (**) s : Set the end monitor time. (5/*10/15/20/25/30/35)
End Mon. OFF : Do not use the end monitor function.
11) “E.O.M. (**) s” (Output EOM tally signal to remote pin (24))
E.O.M. (**) s : Set the EOM time. (0/5/*10/15/20/30/60)
E.O.M. OFF : Do not use the EOM function.
12) “Next Stb. Off (ON)”
* Next Stb. OFF : Return to the play start position and standby when the CUE button is pressed during playback.
Next Stb. ON : Standby at the beginning of the next track when the CUE button is pressed during playback.
13) “Reserve. OFF (ON)”
* Reserve. OFF : Specified track (index) is searched for immediately when select knob is turned during playback.
Reserve. ON : Track (index) to be searched for is scheduled after playback of current track (index) ends when select
knob is turned during playback.
Press the PLAY MODE button to cancel the reserved track.