Filter
Top Products
INDEX
END MON
12
ENGLISH
BASIC OPERATION
4
(1) Before Starting Playback
1
Select the track to be played.
Turn the select knob (
8 – 9).
The selected track is cued and the standby mode is set.
NOTE: The track select mode is set when the button is
off.
There is no need to select an index number when
you want to play the track from the beginning.
Turn the select knob (
8 – 9).
The selected index number is cued and the standby mode
is set.
If a non-existent index number is selected,
“
No 02.Index
” appears and the index number
flashes.
5-1
5-2
6-1
6-2
To check the play start position.
Press the PLAY/PAUSE button.
Monitor the playback signals to check the play start
position.
Press the CUE button.
7
To check the play end position.
Press the END MON button.
PLAY / PAUSE
CUE
PLAY / PAUSE
The pickup returns to the play start position and the
standby mode is set. (Back Cue)
CUE
CUECUE
NOTE: If the CUE button is pressed during the end
monitor operation, the end monitor operation is
canceled, the pickup returns to the play start
position and the standby mode is set.
3
7
5-1
6-2
6-1
4,5-2
OPEN / CLOSE
COMPACT DISC PLAYER
DN-C630
POWER
PHONES LEVEL
MIN MAX
STOP CUE
PRESET
PLAY / PAUSE
TRACK
PLAY
MODE
END MONINDEX
SEARCH
REPEAT
ON / OFF
PROG.PLAY
A-B
PROG. IN
PITCH
TIME
0%
Load a disc.
3
4
Select the play mode.
Press the PLAY MODE button.
2
Make the presettings according to the usage purpose.
(See page 20.)
NOTE: Step 1 and 2 can be performed in the opposite
order.
Select the play finish mode. (Preset Function)
Finish Stop The stop mode (the servo functions
turn off) is set when playback
finishes.
Finish Next The standby mode is set at the
beginning of the next track when
playback is finished.
* After the final track is played, the
standby mode is set at the
beginning of the first track.
Finish Recue When playback is finished, the
standby mode is set at the position at
which playback was started.
To standby at the point where the sound begins.
(Preset Function)
Set the “CueDet.” Level.
When a track is selected, the position at which the sound
begins is found when a track is cued and the standby
mode is set at that point.
Lit
Lit
Single track
play mode
Continuous
play mode
Flashing during search Lit when standby
To select an index number.
Press the INDEX button.
The index number appear when the index
select mode is set.
The end monitored, then the pickup
returns to the play start position and the
standby mode is set. (End Monitor)
Flashing during search Lit when standby
Index number Index number
Lit Off
LitFlashing