Denon DN-C630 CD Player User Manual


 
13
ENGLISH
(2) Starting Playback
9
9 8,9
OPEN / CLOSE
COMPACT DISC PLAYER
DN-C630
POWER
PHONES LEVEL
MIN MAX
STOP CUE
PRESET
PLAY / PAUSE
TRACK
PLAY
MODE
END MONINDEX
SEARCH
REPEAT
ON / OFF
PROG.PLAY
A-B
PROG. IN
PITCH
TIME
0%
PLAY / PAUSE
CUE
PLAY / PAUSE
PITCH%
REMAIN
SINGLE
(3) Stopping Playback
CUE
PLAY / PAUSE PLAY / PAUSE
CUECUE
STOP
Start playback.
Press the PLAY/PAUSE button.
Playback begins and the playback signals are output.
8
When playback is stopped, the play finish mode set in
step 2 above is set.
Playback can be stopped in the following ways:
9
Lit Off
Flashing (indicates the playback position)
Playback is interrupted and the stop
mode is set.
Playback is interrupted, the pickup
returns to the play start position and
the standby mode is set.
Playback is interrupted and the
pause mode is set at that point.
LitFlashing
Sleep mode
The sleep mode is set if no operation is performed for 30
minutes in the standby, pause or manual search mode.
When in the sleep mode, press the PLAY/PAUSE button to
search for the position before the sleep mode was set and
start playback. Press the CUE button to search for the
position before the sleep mode was set and standby at
that point.
(4) PLAY/PAUSE and CUE Operations
The operation switches between playback and pause each
time the PLAY/PAUSE button is pressed.
When the CUE button is pressed during playback, the
pickup returns to the position at which playback was
started.
The diagrams below show playback patterns when the
PLAY/PAUSE and CUE buttons are pressed.
PLAY and PAUSE
When the PLAY/PAUSE button is pressed, playback starts and
proceeds as shown by the arrow on the diagram above.
If the PLAY/PAUSE button is pressed again during playback, the
pause mode is set at that point. Press the PLAY/PAUSE button
again to resume playback.
PLAY/PAUSE
button
pressed
PLAY/PAUSE
button
pressed
PLAY/PAUSE button pressed
Position on disc
Pause mode set at this point
Section
played
Section
played
PLAY and CUE
PLAY, PAUSE and CUE
Back Cue
PLAY/PAUSE
button
pressed
CUE button pressed
Position on disc
Section
played
When the CUE button is pressed after starting playback by
pressing the PLAY/PAUSE button, the pickup returns to the
position at which playback was started and prepares for the next
playback.
Press the PLAY/PAUSE and CUE buttons alternately to start
playback repeatedly from the same position.
This function is called “Back Cue”.
PLAY/PAUSE
button
pressed
PLAY/PAUSE
button
pressed
PLAY/PAUSE
button
pressed
CUE
button pressed
Position on disc
Section
played
Section
played
If the pause mode is set and playback is then resumed, the
position to which the pickup returns with the Back Cue function
changes.
Flashing