Filter
Top Products
ENGLISH
13
2
OPEN / CLOSE
COMPACT DISC PLAYER
DN-C630
POWER
PHONES LEVEL
MIN MAX
STOP CUE
PRESET
PLAY / PAUSE
TRACK
PLAY
MODE
END MONINDEX
SEARCH
REPEAT
ON / OFF
PROG.PLAY
A-B
PROG. IN
PITCH
TIME
0%
(1) Starting Playback from the Middle of a Track
(Manual Search)
• When a track is selected and the PLAY/PAUSE button is
pressed, playback starts from the beginning of that track.
To start from a different position in the track, use the
procedure described below to find the desired position.
Find the play position.
Press the SEARCH button.
Listen to the sound and find the desired play start position.
SEARCH
PLAY / PAUSE PLAY / PAUSE
CUE
CUECUE
(2) Playing at a Different Speed (Pitch)
• Use this function to play discs at different speed.
• The speed can be changed within the range of –9.9 to
+9.9 %.
1-21-1.2.3
OPEN / CLOSE
COMPACT DISC PLAYER
DN-C630
POWER
PHONES LEVEL
MIN MAX
STOP CUE
PRESET
PLAY / PAUSE
TRACK
PLAY
MODE
END MONINDEX
SEARCH
REPEAT
ON / OFF
PROG.PLAY
A-B
PROG. IN
PITCH
TIME
0%
PITCH PITCH
PITCH PITCH
PITCH PITCH
0%
HANDY OPERATIONS
5
1
To check the play start position.
Press the PLAY/PAUSE button.
Monitor the play signal to check the play start position.
2
Cue the play start position.
Press the CUE button.
The pickup returns to the play start position and the
standby mode is set.
3
Each press the SEARCH button
causes 1 frame to change. Each
frame is 1/75th of a second.
Continuing to press down on the
SEARCH button provides an
automatic change of frames, the
speed of which increases while the
button is pressed.
Lit
Playback start
Set the variable speed mode.
Press the PITCH button.
1-1
The play speed decreases
when the pitch slider is
moved upwards, increases
when the pitch slider is
moved downwards.
Set the speed lock mode.
Press the PITCH button again.
Press the PITCH button again to return to the normal
speed.
The play speed set with the pitch slider is held. In this
state, the play speed will not change even if the pitch
slider is moved.
When the playback speed is preset in the preset mode,
that play speed is set.
1-2
2
3
LitFlashing
Flashing
Play speed down
Play speed up
Lit
Off
NOTE:
When the play speed (PITCH) is set, the display shows the
set pitch, but the disc is played at the standard speed until
the PITCH button is pressed (and the LED is flash).
When the play speed is changed, the sampling frequency
of the digital output signal also changes, so it may not be
possible to receive digital signals.
14