Filter
Top Products
ENGLISH
25
[2]
Playing in the Dolby Pro-Logic II mode
..............................................................................................................(All function)
• Playback is performed according to the 2-channel mode and PLII CINEMA, PLII MUSIC and PRO LOGIC mode parameter
settings.
• Applicable sources
• Digital inputs (TV/DBS and V.AUX functions, including DVD
playback discs)
Dolby Digital 2-channel sources
PCM 2-channel sources (except 96 kHz PCM)
• 2-channel analog input sources (all functions)
22, 3
1, 2
VOLUME
ENTER
BAND
MODE
MENU
FUNCTION
DISPLAY RETURN INPUT MODE SURROUND
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE
AUDIO
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT
REPEAT A-B
REPEAT RANDOM
DVD
TV/VCR
CH
VOL
SLEEP
ON
OFF
REMOCON MODE
2
3
4
56
8
9
CLEAR
CALL
0
+10
7
1
STATUS
CDR/MD/TAPE
TUNER/TV/VCR
VCR POWERVCR POWER
TV POWERTV POWER
TV
VCR
NTSC/PAL
MEMO
POWERPOWER
CH
CH
CH
2
1
4
1
Select the input function.
FUNCTION
/ SELECT
Main unit
FUNCTION
Remote control unit
Dolby Pro Logic II playback is not possible in the
digital input function (DVD, TV/DBS or V.AUX)
“DTS” input mode.
2
Set the AUTO DECODE Surround mode.
If the mode is set to anything other than AUTO
DECODE, the AUTO DECODE mode can be set
using the AUTO DECODE/2CH MODE button on
the main unit.
SURROUND
MODE
Main unit
FUNCTION
/ SELECT
Main unit
SURROUND
Remote control unit
\
3
Play a program source with the
mark or a 2-channel source.
• The source is played according to the Dolby Pro Logic
II mode setting.
• The Dolby Pro-Logic II indicator lights when in the
CINEMA and MUSIC modes.
PRO LOGIC II
Lit
PRO LOGIC
Lit
• In the Dolby Pro-Logic mode, the Dolby Pro-Logic
indicator lights.
The mode can be changed during playback by
changing the 2-channel mode (surround parameter)
or by pressing the AUTO DECODE/2CH MODE
button.
4
Set the surround parameters
according to the selected mode.
Refer to steps 1 to 3 at
“Setting the parameters in the
PLII CINEMA, PLII MUSIC and
PRO LOGIC modes” (page
24).
SURR.PARA
Remote control unit
6
• LFE level setting
LFE 0dB
-10 -5 0
... ...
,/
The LFE level can be adjusted between –10 dB and
0 dB in steps of 1 dB.
• DEFAULT setting
DEFAULT Y
/
N
YES NO
,/
When “YES” is selected, the settings are reset to
their factory default values.
NOTES:
• When “DEFAULT” is selected and the cursor button
is pressed (“YES”), “D.COMP.” is automatically set to
“OFF” and “LFE” is reset to the default value.
(“D.COMP.” is not valid for DTS source.)
• Signals encoded in Dolby Digital can only be played in
the Auto decode (Dolby Digital, Dolby Pro Logic II or
Auto stereo), Direct, stereo or virtual modes. Other
modes do not work when playing Dolby Digital signals.
• DTS signals can only be played in the Auto decode
(DTS), Direct or stereo modes. Other modes do not
work when playing DTS signals.
• DTS signals can also be played in the “DTS” input
mode. (See page 19.) In this case, decoding and
playback are only performed when DTS signals are
input.
Surround parameters (2)
D.COMP. (Dynamic Range Compression):
• This parameter adjusts the dynamic range of the
Dolby Digital sound. When listening with the volume
turned relatively low, at night for example, set this to
the “HI” side to lower the peak of the sound and
amplify the quieter sounds, narrowing the dynamic
range and making the sound easier to listen to. Set to
“OFF” to turn this function off.
LFE (Low Frequency Effect):
• Program source and adjustment range
1. Dolby Digital: –10 dB to 0 dB
2. DTS Surround: –10 dB to 0 dB
• When Dolby Digital encoded software is played, it is
recommended that the LFE LEVEL be set to 0 dB for
correct Dolby Digital playback.
• When DTS encoded movie
software is played, it is
recommended that the LFE LEVEL be set to 0 dB for
correct DTS playback.
• When DTS encoded music
software is played, it is
recommended that the LFE LEVEL be set to –10 dB
for correct DTS playback.
Stop operating buttons once the surround parameter
settings have been completed. After several seconds the
normal display reappears and the settings are
automatically set.
Dynamic range Wide
Narrow
OFF LOW MID HI