Filter
Top Products
ENGLISH
60
[3] Setting the parameters in the PLII Cinema, PLII Music and Pro Logic modes
• When PLII Cinema, PLII Music or Pro Logic is selected for the 2-channel mode, detailed parameters can be set for each of these modes.
PLII Music mode: Make the settings using the procedure below.
• Program sources including the mark and CDs and other 2-channel sources are decoded with Dolby Pro Logic II
processing and played in the multi-channel mode.
q PLII Cinema mode: This mode is suited for movies and other Dolby Surround programs.
w PLII Music mode: This mode is suited for stereo music programs.
e Pro Logic compatible mode: This is the original Dolby Surround Pro Logic mode.
+
-
+
-
RC-936
A / V
3
SEARCH MODEREPEAT RANDOMPROG/ DIRECT
MEMO BANDMODE
STAT U S
RETURN
ANGLE AUDIO
SUB TITLE
SETUP TONE /SDB
FUNCTIONSURROUNDINPUT MODETEST TONE
DVD
TUNER
CH
321
654
987
0
/
10
CALL
ENTER
MUTING
+
10
DISPLAY MENU
TOP MENU
SYSTEM MD
CDR TAPE
TUNERTV / VCR
SURROUND
PARAMETER
CH SELECT
CD SRS
TUNING /
TV VOL
TUNERDVD
MD/ LINE-1
TAPE/ LINE-2
AUTO DECODE
VIRTUALDIRECT
5CH STEREO
STEREO
D.AUX
-
+
VCR CH
IN
/
SURR.
IN
/
SURR.
DVD
9
8
21
76
+
-
3
2
1
Select “PLII C”, “PLII M” or “PRO LOGIC” for the 2-channel
mode setting.
2
Set the surround parameters for the selected mode.
• The parameters switch as shown below each time one of
the buttons is pressed.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
SURROUND
PARAMETER
Remote control unit
DEFAULT
PL CINEMA
PANORAMA
DIMENSION
CNTR WIDTH
DEFAULT
PL MUSIC
DEFAULT
PRO LOGIC
3
Set the various surround parameters.
• Panorama setting
PANORA ON OFF
ON
OFF
The selected setting flashes.
• Dimension setting
DIMENSION 3
• Center Width setting
CNTR WIDTH 3
• Default setting
DEFAULT Y/N
When “YES” is selected, the settings are restored to the
factory defaults.
Once the surround parameters have been set, stop operating the
buttons. After several seconds, the normal display reappears and
the settings are automatically entered.
This completes the setting of the parameters.
NOTES:
• The 2-channel mode is set and stored in the memory individually
for the different functions.
,/
0 3 6
,/
... ...
0 3 7
,/
... ...
YES
Y/N
NO
,/
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit Remote control unit