Denon D-M71DVS Stereo System User Manual


 
13
ENGLISH
COMPONENT VIDEO IN
P
B/CB PR/CRY
(6) Connecting to a TV or Monitor Equipped with Component Input Connectors.
When making connections, also refer to the operating instructions of the other components.
The video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks.
Connecting a monitor TV
COMPONENT VIDEO OUT jack
Connect the TVs color difference
(component) video input jacks
(COMPONENT VIDEO INPUT) to the
COMPONENT VIDEO OUT jack using
75 /ohms coaxial video pin-plug
cords.
Color component output connectors (PR/CR, PB/CB and Y)
The red (P
R/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more faithful
reproduction of the colors.
The color component input connectors may be marked differently on some TVs or monitors (P
R, PB and Y/R-
Y, B-Y and Y/C
R, CB and Y, etc.). For details, refer to the TVs operating instructions.
Connect in this way if your TV is compatible with Progressive Scan.
NOTES:
Use the three commercially available video cords to connect the ADV-M71s color component output connectors to the TV or
monitor.
Set the TV TYPE in VIDEO SETUP in DVD SETUP to comply with your TVs video format. When the TV is NTSC formated
set to NTSC.
About selecting the video output INTERLACED or PROGRESSIVE, refer to page 39.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT.
Monitor TV