Denon AVRE400 Stereo Receiver User Manual


  Open as PDF
of 159
 
88
Setup (vpage21)
Playback (Basic operation) (vpage28)
Selecting a listening mode (Sound Mode)
(vpage71)
n HDMI control function (vpage88)
n Sleep timer function (vpage89)
n Quick select function (vpage90)
n Web control function (vpage91)
n Various memory functions (vpage92)
Playback (Advanced operation)
HDMI control function
A recent addition to the HDMI standard is CEC, which allows control
signals from one device to communicate with another device via the
HDMI cable connection. Not all HDMI-equipped devices allow .
n Operations possible by HDMI control
•This unit’s power o function can be linked to the TV power
o operation.
•You can switch audio output devices with a TV operation.
When you set “Output audio from amp” in the TV audio output
setup operation, you can switch the AV receiver unit’s power on.
•You can adjust this unit’s volume in the TV volume adjustment
operation.
•You can switch this unit’s input sources through linkage to TV
input switching.
•When playing a disc player, this unit’s input source switches
to the appropriate source for that player.
•If you switch the input source of the unit to “TV AUDIO”, you
can play TV audio with this unit (vpage 8 “About ARC
(Audio Return Channel) function”).
•When “HDMI Control” (vpage108) in the menu is set to
“On”, signals input to the HDMI input connector are output to
the television or other device connected to the HDMI output
connector, even if the power of this unit is in standby (pass-
through function).
To use this unit to play the audio of a TV that does not support the ARC
function, connect the TV to this unit with an optical-digital or analog
connection (vpage8).
n Setting procedure
1
Set the HDMI output connector corresponding with
the HDMI control function.
Set “HDMI Control” (vpage108) to “On”.
2
Turn the power on for all the devices connected by
HDMI cable.
3
Set the HDMI control function for all devices
connected by HDMI cable.
•Please consult the operating instructions for the connected devices
to check the settings.
•Carry out steps 2 and 3 should any of the devices be unplugged.
4
Switch the television input to the HDMI input
connected to this unit.
5
Switch this unit input to the HDMI input source and
check if the picture from the player is ok.
6
When you turn the TV’s power to standby, check
that the power of this unit also goes to standby.
Basic instructions
Advanced instructions
Information
Advanced instructions
v See overleaf
DVD
 previous next