Filter
Top Products
81
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
How to make detailed settings
Setting items Detailed items Description Page
Audio
Dialog Level Adjusts and enhances the frequency band
corresponding to the human voice at the center
channel to make the voice clearer.
86
Subwoofer Level This setting adjusts the volume level for the
subwoofer.
86
Surr.Parameter Adjusts surround sound parameters.
86
Tone Adjusts the tonal quality of the sound.
88
Restorer Expands the low and high frequency components
of compressed audio content such as MP3 files
to enable richer audio playback.
88
Audio Delay Compensates for incorrect timing between video
and audio.
88
Volume Set the MAIN ZONE (room where the unit is
located) volume setting.
89
Audyssey Makes Audyssey MultEQ
®
, Audyssey Dynamic
EQ
®
and Audyssey Dynamic Volume
®
settings.
89
Manual EQ Uses the graphic equalizer to adjust the tone of
each speaker.
90
Video
HDMI Setup Makes settings for HDMI video/audio output.
92
On Screen Disp. Select the on-screen display user interface
preferences.
93
TV Format Set the video output signal format for the TV you
are using.
93
Inputs
Input Assign Changes input connector assignment.
95
Source Rename Changes the display name for this source.
97
Hide Sources Remove from the display input sources that are
not used.
97
Source Level Adjusts the playback level of the audio input.
97
Input Select Sets the audio input mode and decode mode.
97
Speakers
Audyssey
®
Setup The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically.
20
Manual Setup Perform when setting the speakers manually
or when changing settings made in Audyssey
®
Setup.
99
Setting items Detailed items Description Page
Network
Information Display network information.
103
IP Control Enables network communication in standby
power mode.
103
Friendly Name The Friendly Name is the name of this unit
displayed on the network. You can change the
Friendly Name according to your preferences.
103
Settings Make settings for wired LAN.
104
Diagnostics Used to check the network connection.
105
General
Language Sets the language for display the menu on the
TV screen.
107
Quick Sel.Names Change the “Quick Select” display title to one
you prefer.
107
Auto Standby When you do not perform any operation on this
unit with no audio or video input for a specified
time, this unit automatically enters the standby
mode. Before it enters the standby mode, “Auto
Standby” is displayed on the display of this unit
and the menu screen.
107
Front Display Makes settings related to the display on this unit.
107
Information Show information about receiver settings, input
signals, etc.
108
Usage Data Selects whether or not to send anonymous
usage data to Denon.
109
Firmware Set whether or not to check for firmware update,
update the firmware, and display update and
upgrade notifications.
109
Setup Lock Protect settings from inadvertent changes.
110
Setup
Assistant
Perform the installation, connection, and setup procedures to prepare the
unit for operation following guidance from the setup section of this manual.
C 7
Basic instructions
Advanced instructions
Information
Advanced instructions
DVD