Denon AVRE300 Stereo Receiver User Manual


  Open as PDF
of 138
 
27
Playback (Basic operation)
Setup (vpage20)
n Turning the power on (vpage27)
n Selecting the input source (vpage27)
n Adjusting the master volume (vpage28)
n Turning o the sound temporarily (vpage28)
n Playing a Blu-ray Disc player/DVD player
(vpage28)
n Playing an iPod (vpage29)
n Playing a USB memory device (vpage32)
n Listening to FM/AM broadcasts (vpage35)
n Listening to Internet Radio (vpage44)
n Playing back files stored on a PC and NAS
(vpage47)
n Using online services (vpage51)
n Convenient functions (vpage62)
n AirPlay function (vpage67)
Selecting a listening mode (Sound Mode)
(vpage69)
Playback (Advanced operation) (vpage78)
Important information
Before starting playback, make the connections between the dierent
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Turning the power on
Press POWER X to turn on power to
the unit.
The power indicator flashes green and the
power turns on.
You can also switch the power to standby by pressing X on the main
unit.
n When power is switched to standby
Press POWER X.
GPower indicator status in standby modeH
Normal standby : O
•When “HDMI Pass Through” or “HDMI Control” (vpage92)
is set to “On” : Red
•When “IP Control” (vpage103) is set to “Always On” : Red
Selecting the input source
Press the input source select button
(CBL/SAT, DVD, Blu-ray, GAME,
AUX, MEDIA PLAYER, iPod/USB, TV
AUDIO
, TUNER, NETWORK, MEDIA
SERVER
or INTERNET RADIO) to be
played back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Select the input source using the main unit
Press SOURCE SELECT 0 1.
•Pressing SOURCE SELECT 0 1 switches the input source, as
shown below.
GAME AUX
MEDIA
PLAYER
iPod/USBTUNERNETWORKTV AUDIO
Blu-rayDVDCBL/SAT
Basic instructions
Advanced instructions
Information
Basic instructions
DVD
 previous next