Filter
Top Products
Getting Started Connections Setup Remote Control Multi-Zone Information Troubleshooting
ENGLISH
4
Watching the display, press <PTY> to call out the
desired program type.
5
Press PRESET CHANNEL.
PTY search begins automatically.
b If there is no station broadcasting the designated program type
with the above operation, all the reception bands are searched.
b The station name is displayed on the display after searching
stops.
6
To continue searching, repeat steps 2 to 4.
b If no station broadcasting the designated program type is found
when all the frequencies have been searched, “NO PROGRAMME”
is displayed.
1
Either turn <SOURCE SELECT> or press [TUNER] to
select “TUNER”.
2
Set [MODE SELECTOR 1] to “AUDIO”.
(vpage 51 “Remote Control Unit Operations”)
3
Press <RDS> until “TP SEARCH” appears on the
display.
4
Press PRESET CHANNEL.
TP search begins automatically.
b If no TP station is found with the above operation, all the reception
bands are searched.
b The station name is displayed on the display after searching
stops.
5
To continue searching, repeat steps 2 to 3.
b If no other TP station is found when all the frequencies have been
searched, “NO PROGRAMME” is displayed.
TP Search
Use this function to find RDS stations broadcasting traffic
programs (TP stations).
1
Either turn <SOURCE SELECT> or press [TUNER] to
select “TUNER”.
2
Set [MODE SELECTOR 1] to “AUDIO”.
(vpage 51 “Remote Control Unit Operations”)
3
Press <RDS> until “RDS SEARCH” appears on the
display.
4
Press PRESET CHANNEL.
The search for RDS stations begins automatically.
b If no RDS stations are found with the above operation, all the
reception bands are searched.
b When a broadcast station is found, that station’s name appears on
the display.
5
To continue searching, repeat steps 2 to 3.
b If no RDS station is found when all the frequencies have been
searched, “NO RDS” is displayed.
RDS Search
Use this function to automatically tune to FM stations that
provide the RDS service.
1
Either turn <SOURCE SELECT> or press [TUNER] to
select “TUNER”.
2
Set [MODE SELECTOR 1] to “AUDIO”.
(vpage 51 “Remote Control Unit Operations”)
3
Press <RDS> until “PTY SEARCH” appears on the
display.
PTY Search
Use this function to find RDS stations broadcasting a
designated program type (PTY).
For a description of each program type, refer to “Program
Type (PTY)”.
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
<SOURCE SELECT> <PTY> <RT>
<RDS>
PRESET CHANNEL
<ON/STANDBY>
[MODE
SELECTOR 1]
[MODE
SELECTOR 2]
PRESET
CHANNEL
[TUNER]
[iPod]
[Front]
[Rear]
Playback