Denon AVR-788 Home Theater System User Manual


 
ENGLISH
Zone2 Setup
Make settings for audio playback in a ZONE2 system.
F Menu screen F
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.Zone2 Setup
5.Option Setup
3.Audio Setup
a
Lch Level
Adjust the left channel output level.
2-4.Zone2 Setup
Level Lch : 0
dB
Rch : 0
dB
Vol.Limit : OFF
Power On Lev.: Last
Mute Lev. : Full

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
[Selectable items]
Last
: Use the memorized setting from the last session.
– – –
: Always use the muting on condition when power
is turned on.
–70dB ~ +18dB
: Set the volume level when the power is turned on
in units of 1 dB.
[Selectable items]
Full
: The sound is cut off entirely.
–40dB
: The sound is attenuated by 40 dB.
–20dB
: The sound is attenuated by 20 dB.
[Variable range]
–12dB
~
0dB
~
+12dB
[Variable range]
–12dB
~
0dB
~
+12dB
s
Rch Level
Adjust the right channel output level.
[Selectable items]
OFF
: Do not set a maximum volume.
–20dB
: Set the maximum volume to –20 dB.
–10dB
: Set the maximum volume to –10 dB.
0dB
: Set the maximum volume to 0 dB.
d
Volume Limit
Make a setting for maximum volume.
f
Power On Level
Define the volume setting that is active when the power is turned
on.
g
Mute Level
Set the amount of attenuation when muting is on.
Option Setup
Make various other settings.
F Menu screen F
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.Zone2 Setup
5.Option Setup
3.Audio Setup
a
Amp Assign
Define how the amplifier for the surround back speaker channels
is used.
The places where the surround back amplifier are used can be set
freely according to the usage environment. This makes it possible to
output sound to rooms other than the room (the main zone) where
surround playback is performed (multi-zone playback) or play the sound
with high quality using the front speakers (bi-amp connections).
[Selectable items]
7.1ch
ZONE2
FrontA Bi-Amp
FrontB Bi-Amp
2ch
For details, see “Amp Assign / Multi-zone Connections and Operations”
(vpage 52 ~ 54).
2.Vol.Control
3.Source Delete
4.On-Screen Display
5.Quick Select Name
6.Remote ID Setup
7.Display
8.Setup Lock
1.Amp Assign
2-5.Option Setup
1.AVR788E3_ENG_108.indd 31 2007/10/05 16:22:14