Filter
Top Products
45
Dolby Digital mode (only with Dolby Digital RF or digital input) and DTS Surround (only with digital
input)
1
Select the input source.
Playback with a Dolby Digital RF input
1 Select VDP for the input.
INPUT SELECTOR
(Main unit) (Remote control unit)
2 Set the input mode to “AUTO” or “RF”.
(Main unit) (Remote control unit)
Playback with a digital input
1 Select an input source set to digital (COAXIAL/OPTICAL)
(see page 25).
2 Set the input mode to “AUTO” or “DIGITAL”.
2
Select the Dolby Surround mode.
13
1
2
3
Play a program source with the , mark.
• The Dolby Digital indicator lights when
playing Dolby Digital sources.
For operating instructions, refer to the
manuals of the respective components.
When the source is played, the input channel indicators
indicating the signals included in the source light as shown
on the diagram below. (The number of channels that lights
depends on the input source.)
L: Front left channel
C: Center channel
R: Front right channel
SL: Surround left channel
S: Mono surround channel
SR: Surround right channel
L C
CH INDICATOR
R
SL S SR
• Also, the following indicator lights if the
software contains Low Frequency Effect
sounds:
The DTS indicator lights when playing DTS
sources.
Lit
Lit
VDP
2
INPUT MODE
INPUT MODE
INPUT SELECTOR
(Main unit) (Remote control unit)
VDP
2
(Main unit) (Remote control unit)
INPUT MODE
INPUT MODE
(Main unit) (Remote control unit)
DOLBY / DTS
SURROUND
DOLBY / DTS
SURROUND
DVD
START LEARNED/TX
HOME THX CINEMA
TUNING
BAND
TITLE
MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE MULTI DVD
SET UP
RETURN
PANEL
DISPLAY
ON SCREEN
DOLBY / DTS
SURROUND
DIRECT
DSP SIMULATION
5CH STEREO STEREO
INPUT MODE
ANALOG EXT.IN
MUTING
MASTER VOL.
VOLUME DISC SKIP+
SYSTEM CALL POWER
VDP TUNER SHIFT
TV/DBS V.AUX PHONO
VCR-1 CD
MD
/
TAPE-1
CHANNEL
VCR-2
TAPE-2 MON
TV/VCR
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD
MD
LOCK
DECK
SYSTEM
SETUP
SURROUND
PARAMETER
CH SELECT
SELECT
RC-853
123
4
SET
A / B
CALL OFF
ENTER
ON
/
SOURCE
56
789
+10
0
1
2
1
5
4
6
LFE
Lit