Filter
Top Products
36
Clearing “learned” remote control signals and resetting the preset memory
1
2
3
Press the USE/LEARN selector button with the tip of a pen,
etc., to set the learn mode.
To clear “learned” remote control signals, set the slide
switch to the position at which the signals were “learned”.
To clear the preset memory settings, set the slide switch to
“VIDEO”.
Set the slide switch to the position at which the signals were
“learned” or at which the preset memory settings were set.
AVR/AVC VIDEO
AUDIO
DVD TV
VDP VCR
CD
MD
LOCK
DECK
DVD
START LEARNED/TX
HOME THX CINEMA
TUNING
BAND
TITLE
MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE MULTI DVD
SET UP
RETURN
PANEL
DISPLAY
ON SCREEN
DOLBY / DTS
SURROUND
DIRECT
DSP SIMULATION
5CH STEREO STEREO
INPUT MODE
ANALOG EXT.IN
MUTING
MASTER VOL.
VOLUME DISC SKIP+
SYSTEM CALL POWER
VDP TUNER SHIFT
TV/DBS V.AUX PHONO
VCR-1 CD
MD
/
TAPE-1
CHANNEL
VCR-2
TAPE-2 MON
TV/VCR
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD
MD
LOCK
DECK
SYSTEM
SETUP
SURROUND
PARAMETER
CH SELECT
SELECT
123
4
SET
A / B
CALL OFF
ENTER
ON
/
SOURCE
56
789
+10
0
4
2
1,5
3
4
5
Press the SYSTEM CALL SET button, and hold it in for at
least four seconds.
• When both the START and LEARNED/TX LEDs light
simultaneously, all the stored codes are cleared.
Press the USE/LEARN selector button.
Lit
9
OPERATION
Before operating
1
2
3
Refer to “CONNECTIONS” (pages 6 to 13) and check that all
connections are correct.
Set the remote control unit’s slide switch to the AUDIO
position. (only when operating with the remote control unit)
Turn on the power.
Press the POWER switch (button).
AVR/AVC VIDEO
AUDIO
ON / STANDBY
OFF
ON
/
SOURCE
ON/STANDBY
Lights
3
• ¢ ON/STANDBY
The power turns on and “ON/STANDBY” indicator is lit.
Several seconds are required from the time the power switch is set to the “ON” position until sound is output. This is due to the built-in
muting circuit that prevents noise when the power switch is turned on and off.
Set the POWER switch to this position to turn the power on and off from the included remote control unit (RC-853).
• £ OFF
The power turns off and “ON/STANDBY” indicator is off.
In this position, the power cannot be turned on and off from the remote control unit.
DVD
START LEARNED/TX
HOME THX CINEMA
TUNING
DOLBY / DTS
SURROUND
DIRECT
DSP SIMULATION
5CH STEREO STEREO
INPUT MODE
ANALOG EXT.IN
MUTING
MASTER VOL.
VOLUME DISC SKIP+
SYSTEM CALL POWER
VDP TUNER SHIFT
TV/DBS V.AUX PHONO
VCR-1 CD
MD
/
TAPE-1
CHANNEL
VCR-2
TAPE-2 MON
TV/VCR
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD
MD
LOCK
DECK
SYSTEM
SETUP
SURROUND
PARAMETER
RC-853
123
4
SET
A / B
CALL OFF
ON
/
SOURCE
56
789
+10
0
2
3
(Main unit) (Remote control unit)