Denon AVR-1707 Stereo Receiver User Manual


 
54
ENGLISH
ENGLISH
Specifications
¢ Audio section
Power amplifier
Rated output: Front (A, B):
75 W + 75 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
110 W + 110 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Center:
75 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
110 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
75 W + 75 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
110 W + 110 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
75 W + 75 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
110 W + 110 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Output terminals: Front: A or B 06 ~ 16 /ohms
A + B 12 ~ 16 /ohms
Center, Surround, Surr. Back: 06 ~ 16 /ohms
Analog
Input sensitivity / input impedance: 200 mV / 47 k/kohms
Frequency response: 10 Hz ~ 100 kHz: +1, –3 dB (DIRECT mode)
S/N: 98 dB (DIRECT mode)
¢ Video section
Standard video terminals
Input / output level and impedance: 1 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB
S-Video terminals
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 /ohms
C (color) signal — 0.3 (PAL) / 0.286 (NTSC) Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB
Color component video terminal
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 /ohms
P
B
/CB signal — 0.7 Vp-p, 75 /ohms
P
R
/CR signal — 0.7 Vp-p, 75 /ohms
Frequency response: DC ~ 100 MHz — +0, –3 dB
¢ Tuner section [FM] [AM]
(note: µV at 75 /ohms, 0 dBf = 1 x 10
–15
W)
Receiving Range: 87.50 MHz ~ 108.00 MHz 522 kHz ~ 1611 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO 77 dB
STEREO 72 dB
Total Harmonic Distortion (at 1 kHz): MONO 0.15%
STEREO 0.3%
¢ General
Power supply: AC 230 V, 50 Hz
Power consumption: 415 W
1 W Max (Standby)
Maximum external dimensions: 434 (W) x 147 (H) x 417 (D) mm
Mass: 11.4 kg
¢ Remote control unit (RC-1049)
Batteries: R6P/AA Type (Two batteries)
External dimensions: 52 (W) x 243 (H) x 21 (D) mm
Mass: 175 g (included batteries)
* For purposes of improvement, specifications and design are subject to change without notice.