Filter
Top Products
Basic Operation Basic Operation
22
ENGLISH
ENGLISH
Selecting the Dolby Pro Logic
II
x (Pro Logic
II
)
mode
Press [STANDARD] to select “DOLBY PLIIx”.
Play a program source.
DOLBY PLIIx
DTS NEO:6
Press SURROUND PARAMETER.
It is possible to play analog input signals and digital input signals (2-
channels) in the surround mode.
This mode is optimal for playing program sources recorded in Dolby
Surround.
Press
DD HH
to select the item, then press
FF GG
to set.
The mode switches as shown below each time the button is
pressed.
• When the CINEMA mode:
PANORAMA:
This is effective when the surround effect seems weak.
DIMENSION:
This shifts the center of the sound field image to the front or
surround side. This compensates for when the sound field image
seems unbalanced. (0 to 6, default : 3)
CENTER WIDTH:
A natural expansion to the front can be achieved by adjusting the
center signal’s output balance between the center and front
channels. (0 to 7, default : 3)
Press ENTER or SURROUND PARAMETER.
Press
FF GG
to select the play mode.
1
2
3
4
CINEMA:
This mode is suited for playing movie sources recorded in Dolby
Surround and general sources recorded in stereo.
MUSIC:
This mode is suited for playing stereo music signals in the
surround mode. With music signals, the sound field expansion
differs according to the type of music, the recording conditions
(live/studio), etc.. Because of this, the MUSIC mode offers a
number of optional parameters for further adjusting the sound
field.
GAME:
This mode is optimum for games. The GAME mode can only be
used for 2-channel audio sources.
PL:
This mode is compatible with conventional Dolby Pro Logic sources.
5
6
MODE CINEMA
CINEMA EQ
DEFAULT
SURROUND BACK
TONE DEFEAT
•When the MUSIC mode:
MODE MUSIC
TONE DEFEAT
DIMENSION
PANORAMA
SURROUND BACK
DEFAULT CENTER WIDTH
MODE GAME
TONE DEFEAT
DEFAULT
SURROUND BACK
• When the GAME mode:
MODE DOLBY PL
DEFAULT
SURROUND BACK
CINEMA EQ TONE DEFEAT
If you do want the bass and treble to be adjusted, turn off the
tone defeat mode.
When “MUSIC” mode is selected:
• When the DOLBY PRO LOGIC mode:
About the button names in this explanation
<>
: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
ENTER
D H F G
D H F G
SURROUND
PARAMETER
[STANDARD]
ENTER
SURROUND PARAMETER D H
F G, ENTER