Filter
Top Products
34
Auto Preset
Use the auto preset function to program radio stations.
Setting items Setting details
Start
Start the auto preset
process.
TUNER
If an FM station cannot be preset automatically, select the desired
station by tuning it in manually, then preset it manually.
Preset Skip Default settings are underlined.
Set the preset memory block (from A to G) you do not want to display.
Setting items Setting details
Block A – Block G
Select a block to be skipped
from among preset blocks
(from A to G).
TUNER
ON : Display the selected preset memory block.
SKIP : Do not display the selected preset memory block.
Video Select Default settings are underlined.
Setting items Setting details
Video Select
Video of another input
source is played back
combined with the playing
audio.
Source : Play the picture and sound of the input source.
DVD / SAT/CBL / V.AUX / DOCK : Select video input source to view. This
can be set for individual input sources.
NOTE
It is not possible to select HDMI input signals.
Input Setup
Input Mode Default settings are underlined.
The input modes available for selection may vary depending on the input source.
Setting items Setting details
Input Mode
Set the audio input modes
for the different input
sources.
It is normally recommended
to set the audio input mode
to “Auto”.
Auto : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital input (OPTICAL/COAXIAL).
Analog : Play only signals from analog input.
•If an input source is “BD”, “GAME”, “DOCK”, “DVD” or “V.AUX”,
“Digital” can be selected by assigning “Input Assign” (vpage 33)
to “OPTICAL” or “COAXIAL” (Selectable items differ depending on the
input source.).
If an input source is “TUNER”, the setting is fixed to “Analog”.
•If the input source is set to “BD”, “TV” or “GAME”, it cannot be set to
“Analog”.
•When digital signals are properly input, the indicator lights on
the display. If the indicator does not light, check the digital input
connector assignment and the connections.
Decode Mode
Set the audio decode mode
for input source.
BD
DVD
TV
SAT/CBL
GAME
V.AUX
DOCK
Auto : Detect type of digital input signal and decode and play automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
•This item can be set for input sources for which “OPTICAL” or
“COAXIAL” is assigned at “Input Assign” (vpage33).
•This item can be set for HDMI input sources (BD, DVD, SAT/CBL or
GAME).
•Normally set this mode to “Auto”. Set “PCM” and “DTS” when
inputting the corresponding input signal.
Basic version
Advanced version
Information
Advanced version
BD