Open as PDF
32 Using Your Projector
When Password Protect is enabled, a Password Protect screen
requesting you to enter a password will be displayed when the power plug is
inserted into the electrical outlet and the power for the projector is first
turned on. By default, this function is disabled. You can enable this feature
using the Password menu. This password security feature will be activated
the next time you turn on the projector. If you enable this feature, you will
be asked to enter the projector's password after you turn on the projector:
1st time password input request:
and then select
the password setting.
Enable the Password function will pop up a character screen, key in
a 4-digit number from the screen and press the
To confirm, enter the password again.
If the password verification is successful, you may resume with
accessing the projector's functions and its utilities.