Filter
Top Products
- 28 -
Learning a Pre-programming Code
By following one of the methods below, you may program
the remote to operate a wide range of devices from other
manufacturers.
Direct Code Entry Method
Find the 3-digit number for the brand name of the com-
ponent that you want to operate in the code list follow-
ing pages. (See 29 page.)
Turn on the component that you want to operate.
While holding down the DEVICE button on the remote
controller that you want to program, press the ENTER
button for 2 seconds, and then release both buttons.
Then the SEND/LEARN indicator blinks twice.
Within 10 seconds, enter the 3-digit code number.
(Correct input: SEND/LEARN indicator blinks fourth.
Incorrect input: SEND/LEARN indicator blinks once.)
If the component does not operate properly, return to
step and repeat the steps above.
3
5
4
3
2
1
A
Manual Search Method
Turn on the unit that you wish to include in the LR-7500
remote controller.
Press the DEVICE button (VCR, SAT, TV) and the ENTER
button at the same time for 2 seconds until the
SEND/LEARN indicator blinks twice.
Press the
5 or b button. Each press will send out a
series of codes from the remote's built-in database.
When the unit being programed turns off, press the
ENTER button.
(Correct input: SEND/LEARN indicator blinks fourth.
Incorrect input: SEND/LEARN indicator blinks once.)
Code Check Method
Check if enter the 3-digit code number directly.
While holding down the DEVICE button, press the
ENTER button for 2 seconds and then release both buttons
and then the SEND/LEARN indicator blinks twice.
Press the DIGITAL button.
The 3-digit code number blinks in order.
Example: If you enter '105'
1. 1: Indicator blinks once.
2. 0: Indicator blinks tenth.
3. 5: Indicator blinks fifth.
3
2
1
C
4
3
2
1
B
ENTER
Numeric
DEVICE
Controlling other Components Connected to the LR-7500
The LR-7500 is equipped with a powerful remote control not
only receiver's functions, but also most popular brands of
audio and video equipment, including CD players, cassette
decks, TV sets, cable boxes, VCRs, satellite receivers and
other home theater equipment.