Dantax LR-7500 Stereo Receiver User Manual


 
- 10 -
Connections
VIDEO COMPONENTS
VIDEO, S-VIDEO , COMPONENT JACKS
There are 3 types of video jacks on the rear panel.
VIDEO jack
The video signal for the VIDEO jacks is the conventional com-
posite video signal.
S-VIDEO jack
The video signal is separated into luminance (Y) and color (C)
signals for the S-VIDEO jack. The S-VIDEO signals enables
high-quality color reproduction. If your video component has
an S-VIDEO output, we recommend to use it. Connect the S-
VIDEO output jack on your video component to the S-VIDEO
input jack on this unit.
Component jack
Make component video connections to a TV or monitor with
component inputs to produce higher quality video images. Use
a component video cable or 3 video cords to connect the com-
ponent video out jacks on the LR-7500 to the monitor.
Video convert
The input signals S-video are converted video signals can be
output.
Priority is given to S-VIDEO jack when having input by VIDEO
and S-VIDEO jack from the same source.
Notes:
• Be sure to connect the left and right audio channels properly.
Red connectors are for the R (right) channel, and white con-
nectors are the for L (left) channel.
• Be sure to connect the inputs and outputs of the video sig-
nals properly.
If you connect the S-VIDEO or component signal to the S-
VIDEO or component jack on this unit, it is not necessary to
connect the conventional video signal to the VIDEO (compos-
ite) jack. If you use both video inputs, this unit gives priority to
the S-VIDEO signal.
• Each type of video jack works independently. Signals input to
the VIDEO (composite) and S-VIDEO jacks or component are
output to the corresponding VIDEO (composite) and S-VIDEO
or component jacks, respectively.
• You may need to setup the digital audio output format of your
DVD player, or other digital source components. Refer to the
instructions of the each component connected to the digital
input jacks.
• There is no Dolby Digital RF input jack. Please use an exter-
nal RF demodulator with a Dolby Digital decoder to connect a
video disc player which has a Dolby Digital RF output jack to
the digital input jack on this unit.
R
VIDEOAUDIO
IN
L
OUT IN
LR
OUT IN OUT
VCR
S-VIDEO
VIDEO PROJECTOR
AUDIO
OUT
R L
DVD PLAYER
S-VIDEO
OUT
VIDEO
OUT
DIGITAL
OUT
Y
C
B
/P
B
C
R
/P
R
COMPONENT
VIDEO OUT
S-VIDEO
IN
Y
C
B
/P
B
C
R
/P
R
COMPONENT
VIDEO IN