Dantax LR-7500 Stereo Receiver User Manual


 
- 16 -
Press the STANDBY/ON button.
Select a source by pressing the SOURCE (
5/b) button
repeatedly.
DVD
CD
TUNER
TAPE
7.1 CH DIRECT IN
VIDEO 1
VIDEO 2
AUX 1
AUX 2
Press DIGITAL button and press the 5orb button
repeatedly to select one of the digital inputs or the ana-
log input for any source.
or
1. Press the MENU button on the front panel.
2. Each time the SELECT(
5orb) button is pressed until
"DIGITAL INPUT" displayed on the front panel.
3. Press the ENTER button.
4. Each time the SELECT(
5orb) button is pressed to
select you desired input.
Play the source, and gradually turn up the volume to
the required level with the VOLUME control.
4
3
2
1
Basic Operations 1
VOLUMESOURCE
SELECT
MENU ENTERSTANDBY/ON
DIGITAL
DELAY
- Press this button to begin the process for setting the
delay times used LR-7500 when processing surround
sound or to compensate for video-to-audio delays
caused by the use of digital sources or video displays.
SET UP
- Enter or exit the system setup menu. (DVD only)
ENTER
Press to enter setting.
DIGITAL
- Press this button to assign one of the digital inputs to a
source
MENU
- Access the menu on a DVD disc. (DVD only)
OSD
- Press this button to activate the ON-Screen
Display(OSD) system used to set up.
- Select to NTSC or PAL (press this button for more than
3 seconds).
VOL (^/v)
Press to adjust volume.
MUTE
Press to activate the mute function.
32
31
30
29
28
27
Control Functions
3