Filter
Top Products
- 19 -
Speaker Configuration
SPEAKER
SIZE
SPEAKER
DELAY
FRONT
SPEAKER
SMALL
LARGE
FRONT L 9.0 M
: Press the 5orbbutton.
: Press the tbutton.
CENTER 9.0 M FRONT R 9.0 M SURR R 9.0 M
CENTER
SPEAKER
SMALL
LARGE
NONE
FRONT L
DISTANCE
CHANNEL
LEVEL
(CH LEVEL)
FRONT L
LEVEL
FL 0dB
FL -10dB
FL +10dB
CEN 0dB
CEN -10dB
CEN +10dB
FR 0dB
FR -10dB
FR +10dB
SR 0dB
SR -10dB
SR +10dB
CENTER
LEVEL
FRONT R
LEVEL
SURR R
LEVEL
SBR 0dB
SBR -10dB
SBR +10dB
SBACK R
LEVEL
SBL 0dB
SBL -10dB
SBL +10dB
SBACK L
LEVEL
SL 0dB
SL -10dB
SL +10dB
SURR L
LEVEL
S-W 0dB
S-W -10dB
S-W +10dB
WOOFER
LEVEL
FRONT L 0.0 M CENTER
DISTANCE
CENTER 0.0 M FRONT R
DISTANCE
FRONT R 0.0 M SURR R
DISTANCE
SBACK R
DISTANCE
SBACK L
DISTANCE
WOOFER
DISTANCE
A/V SYNC
DELAY
SURR R 0.0 M
SBACK R 9.0 M
SBACK R 0.0 M
SBACK L 9.0 M
SBACK L 0.0 M
SURR L 9.0 M
SURR L 0.0 M
SURR L
DISTANCE
DELAY 80mS
DELAY 00mS
WOOFER 9.0 M
WOOFER 0.0 M
LARGE
NONE
SURR
SPEAKER
SMALL WOOFER
SPEAKER
LEFSBACK
SPEAKER
SMALL
LARGE
NONE
LEF+FRONT
NONE
It is important to perform speaker configuration prior to
using the surround sound decoder.
This allows the unit to sense the available speakers and
automatically select decoding modes. It is possible to
receive multi-channel surround sound without a center
speaker, but for best results with Dolby Pro Logic IIx
and Dolby Digital decoding, at least 5 speakers (Left,
Center, Right, Left Rear and Right Rear) should be used.
< When no action is taken for 10 seconds, the Speaker
Setup mode will be cancelled.
Size of Speakers
Press the POWER button to turn the unit on.
Press the SURR.M button and select another sur-
2
1
round mode for 7.1 channel (such as DOLBY PRO
LOGIC IIx MUSIC or MOVIE, etc).
Press the SPEAKER button.
"FRONT SPEAKER" appears on the front panel's dis-
play.
Press the ENTER button.
"FRONT LARGE" or "FRONT SMALL" appears on the
display.
Press the
5
/
b
buttons to change the setting.
Press the ENTER button.
The setting is saved in memory.
Press the
5
button.
The next configuration (CENTER) appears on the dis-
play.
Repeat step to to set other configurations.
When all the configurations have been finished,
press the SPEAKER button (or leave the unit for 5
seconds) to exit the Speaker Setup mode.
84
8
6
5
4
3
SURR.M
SPEAKER
POWER
ENTER