Crestron
CNAMPX-2X60
2 Channel Professional Audio Amplifier
General Safety Precautions
Read all information and instructions provided in this operations guide.
Retain this operations guide.
Heed all warnings and cautions printed in this operations guide.
Follow all instructions in the order that they are provided.
Do not use this unit near water.
Clean only with a damp cloth.
Do not block any of the ventilation openings. Install in accordance with the
instructions in this operations guide.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus that produce heat.
Do not defeat the safety purpose of the polarized or ground-type plug. A
polarized plug has two blades with one wider that the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. When the provided plug does not fit into an
outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles (if provided), and the point where they exit the unit.
Use only attachments/accessories specified in this operations guide.
When an equipment rack is used, use caution when moving the rack/unit
combination to avoid injury or tip-over.
Unplug this unit during lighting storms or when unused for long periods of time.
Refer all service to certified Crestron service personnel. Servicing is required
when the unit has been damaged in a way, such as power cord or plug is
damaged, liquid has been spilled or objects have fallen into the unit, the unit has
been exposed to rain or moisture, does not operate normally, or has been
dropped.
CNAMPX-2X60 Rear Ports and Indicators
A number of ports and indicators are provided on the rear of the CNAMPX-2X60.
Refer to the illustration below and the descriptions on the next page.
CNAMPX-2X60 Rear Panel
INPUTS
SUMMING
ST
BRIDGED
RIGHT
BRIDGED
ATTENTION:
POUR LA PROTECTION CONTRE LES RISQUES
BRIDGED
+
–
D'INCENDIES N'UTILISEZ SEULEMENT LE MÊMES TYPE DE
FUSIBLE. DÉBRANCHEZ LE CÂBLE D'ALIMENTATION
AVANT DE CHANGER LE FUSIBLE.
RISQUE DE CHOC ELECTRIQUE NEPAS OUVRIR
AVIS:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
PWR
NET
CAUTION:
FOR CONTINUED PROTECTION AGAINST FIRE
HAZARD USE ONLY SAME TYPE AND RATING FUSE.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.
24
Y
Z
G
OVERRIDE/
SETUP
F
8A 125V
120V~60Hz
960 WATTS MAX
MADE IN THE USA
DATE:
4 - 8 OHM
OUTPUTS
CRESTRON
RIGHT
Operations Guide – DOC. 8178 2 Channel Professional Audio Amplifier: CNAMPX-2X60 • 3