Crestron
CNAMPX-2X60
2 Channel Professional Audio Amplifier
2 Channel Professional Audio
Amplifier: CNAMPX-2X60
Description
Functional Description
The CNAMPX-2X60 is a 2-channel, 60-Watts per channel audio amplifier. As part
of a Cresnet system, the unit can accept remote power on/off commands and report
ambient temperature within the enclosure. Temperature is available as Fahrenheit or
Celsius and the signal can be used under program control to reduce the audio
volume, activate an external cooling fan, or turn the unit off.
Functional Summary
• 2 Channels of Amplification
− 60 Watts/Channel Stereo into 8 Ohm Load (90
Watts into 4 Ohms)
− 200 Watts Bridged into 8 Ohms
− Flat within +0, -0.1 dB from 20 Hz to 20 KHz
• 3-Position Mode Selection Switch: Stereo, Mono
(Sum L+R), and Bridged
• Can Be Used In Many Applications, Including:
− Local Stereo Amp For Remote Room
− Sub-Amp For Home Theater’s Passive Subwoofer
All audio connectors are gold plated to minimize oxidation, and three types of wire
terminations can connect to the audio outputs. A highly efficient toroid transformer
provides ample power to the two-channel amplifier module. No fans are required but
if the unit is placed in a rack configuration, it must have a minimum of one rack
space above and below for adequate ventilation.
The CNAMPX-2X60 is also available as an international version. All of the features
are identical with the exceptions of the international AC power requirements and
power cord and the unit nomenclature of CNAMPXI-2X60. Throughout this
operations guide, all references to CNAMPX-2X60 apply to both versions except
where noted.
Physical Description
The CNAMPX-2X60, shown below, is housed in a black enclosure with labeling on
the front and rear panels. The enclosure consists of 13-gauge powder-coated steel
Operations Guide – DOC. 8178 2 Channel Professional Audio Amplifier: CNAMPX-2X60 • 1