Creative Platinum eX Speaker System User Manual


 
General Specifications A-3
Connectivity
Sound Blaster
Audigy 2 Platinum
eX Card
Audio Outputs 2 x line-level analog outputs via stereo jacks on rear bracket: Front and Rear Line-Outs 1 and 2
Stereo headphone (32-ohm load) support on Line Out 1
1 x line-level three channel analog output via 4-pole 3.5 mm minijack on rear bracket: Front Center,
Rear Center and Subwoofer channel
SB1394/FireWire AD_LINK 2 connector on rear bracket for power supply to the External I/O Module.
Interfaces AD_LINK 1 connector for linking to the External I/O Module
Joystick/MIDI connector for connection to the audio card
The 6-pin SB1394/FireWire
connector/port has a 3-watt
maximum power output.
Connect only one high power
usage device such as an IEEE
1394 hard disk or CD-RW drive
to this port unless it is powered
off the AC outlet.