Filter
Top Products
Appendix D - LED Patterns and Test Switch Settings 63
IntraPort 2 Special Indicators
IntraPort 2+ Special Indicators
IntraPort 2/2+ VPN Access Server Switch Settings
v Note: Settings marked with an asterisk may erase your Flash ROM.
Please do not use these settings without first contacting Compatible
Systems Technical Support.
Ethernet Lights Connections/Users Indication
4&5 flashing 36&42 flashing Router stacks starting up.
2&3 flashing 1&6, 24&30, 48&54
flashing
No OS loaded.
Running from ROM.
1,4&5 flashing 36,42 (and Sys Rdy)
flashing
Erasing OS or config
in Flash ROM.
Scanning from the outside toward the center
Flash ROM erase due to switch
setting five or six is complete. Set
switch to zero and cycle power.
Ethernet Lights Connections/Users Indication
4&5 flashing 120&140 flashing Router stacks starting up.
2&3 flashing 1&20, 80&100,
160&180 flashing
No OS loaded.
Running from ROM.
1,4&5 flashing 120&140(and Sys Rdy)
flashing
Erasing OS or config
in Flash ROM.
Scanning from the outside toward the center
Flash ROM erase due to switch
setting five or six is complete. Set
switch to zero and cycle power.
0 Normal Operation
1Unused*
2Unused*
3 Run Boot ROM Downloader
4Unused*
5 Erase Flash ROM (OS and Configuration)
6 Erase Flash ROM (Configuration Only)
7Unused*
8Unused*
9 Allow letmein password for 5 minutes after powerup