Filter
Top Products
Chapter 6 - Basic Configuration Guide 27
5. Set an IPSec Gateway.
IPSec Gateway
To access this dialog box, select IPSec Gateway under Global in the
Device View.
A. For dual Ethernet setups, the IPSec Gateway is the equivalent
of a default gateway for the IPSec interface (Ethernet 1). Enter
the TCP/IP address of the upstream or Internet router for your
network. This must be an address on the same TCP/IP network
as the Ethernet 1 address of the IntraPort 2/2+.
For single Ethernet setups, the IPSec Gateway is an optional
setting. It serves as a default gateway for all IPSec (i.e., tun-
neled) traffic. Enter the TCP/IP address of your Internet
access/firewalling router. This must be an address on the same
TCP/IP network as the Ethernet 0 address of the IntraPort
2/2+.
B. Click OK.