Filter
Top Products
GENERAL OPERATION
POWER ON
When power is connected for the first time, or if the power cord was unplugged and - Press the MEMORY button ONCE. The Minutes segments display "00" . The Hour
reconnected: segments flash continuously
- The STANDBY LED lights, and the LCD panel appears Clock Time as follows :
- Press the Skip/Search >> or << button to select the desired hour.
- Press the MEMORY button again and the minute segments flash.
- Press the POWER button. The STANDBY LED turns off and the unit defaults to the
FM band of tuner mode.
Afterward, when the POWER is turned on, the previously chosen function will be selected.
- Press the Skip/Search >> or << button to select the desired minute.
- Press the MEMORY button once more. The flashing stops and the time is set.
SETTING THE CLOCK
- At Standby mode (Power Off), press the MEMORY button for some seconds will access
the time format change mode.
- At Normal (Standby Off) mode (Power On), press DISPLAY to display the clock time,
then press the MEMORY button for some seconds will access the time format change mode.
- The actual time format will be shown in the display '12 H' or '24 H' flash continuously. - All the time information is shown in either 12h ro 24h format.
- Press the Skip/Search >> or << button to change the 12h or 24h format. - In case of a 12-hour clock , watch the AM/PM indication.
9