Filter
Top Products
Using the Cassette Player
LISTENING TO TAPE RECORDING
Stop/Eject button - Press to stop all deck operations. Press again to open the Cassette Doors. A. Recording from Radio to Tape
Fast Forward Button - Press to start rapid tape Fast winding in forward direction. - Press the TUNER button to select tuner mode, and press the STOP/BAND button
Fast Rewind Button - Press the to start rapid tape Fast winding in reverse direction. to select the desired band.
Play Button - Press to start playing a tape. - Tune in your station and insert your cassette tapes.
Pause Button - Press to stop tape operation temporarily. - To start recording, press the Record button and the Play button of deck at the same
Press again to resume tape operation. time to start recording
Record Button - Press together with Play button to start recording. - To stop recording, press the Stop/Eject Button.
Auto Stop B. Recording from CD to Tape
When the tape reaches the end in play or record, the built-in Auto Stop system releases the - Press the CD button to select CD mode.
depressed play, record buttons. - Insert the CD you want to record.
When the Auto Stop system operates while recording from the built-in radio or CD Player, - Insert your cassette suitable for recording, press Pause button then press the
only the cassette function is brought automatically to a stop and the radio or CD Player will Record button and the Play button of deck at the same time. Recording function will
continue to play. be stand by.
- Activate the CD player, and then press (to release) Pause button to start recording.
- The recording level is set automatically.
INSERTING/REMOVING CASSETTES - To stop recording, first press Stop button on CD player, then press the Stop/Eject
- Open/Flip down the Tape Control Door. Button on the tape deck.
- Press the Stop/Eject Button to open the cassette door.
- Slide the cassette tape into the door with the exposed section of the tape facing downwards.
- Push the cassette door closed and securely before starting. CAUTION
- To remove a cassette, press the Stop/Eject Button to open the door and lift out your tape. To avoid damage to the cassette mechanism or to the cassette tapes,
always depress the Stop/Eject Button between each operation.
PLAYBACK
- Press the TAPE button to select Cassette Player mode .
- Insert your cassette tapes.
- Press the Play Button to activate playback.
- Adjust the Volume Controls to the desired level.
- Use Pause Button whenever you wanted to stop playback temporarily.
- Press the Stop/Eject Button when finished.
11