Filter
Top Products
GENERAL OPERATION (CONT.)
TIMER OPERATION TUNER OPERATION
To set the wake-up timer Basic operation
- Press the POWER button to turn the unit off STANDBY - Press POWER button to turn on the power.
- Press DISPLAY button. The TIMER indicator appears on the - Press the TUNER button and press the BAND button to select AM or FM.
LCD and flashes. Press MEMORY button the hour segment flashes. - Press and release the Skip/Search >> or << button to select the desire radio station.
- Press the Skip/Search >> or << button to select the wake-up hour. - Press and hold the Skip/Search >> or << button briefly to search up or down for the
- Press the MEMORY button again. The hour segment stops flashing, the minute next receivable station. (Auto Scan)
segment flashes.
- Press the Skip/Search >> or << button to select te wake-up minute.
To store favourite stations in memory
- Press TIMER button once for timer operation. To disable timer operation, press the You can store up to 10 stations for FM and 10 station for AM randomly in memory.
TIMER button again. Setting will still be kept in memory for future occasions - Select the desired radio station as described above.
when timer operation is desired. (Press the TIMER button again to activate.) - Press the MEMORY button. The MEMORY indicator flashes on LCD.
- Press the PRESET / REPEAT button to assign the present number.
NOTE: The timer will turn on the function last used as follows:
- Previously selected radio station For example : To store a particular radio station on preset CH19, you can press the
- CD-track 1 PRESET / REPEAT button 19 times. The LCD shows the preset number.
- Press the MEMORY button to store the selection. The MEMORY indicator will be disa
p
Sleep-to-music function - Repeat steps 3 and 4 to store additional radio stations in memory.
- Perss CD/TUNER/TAPE button to select the desired function mode.
- Press the SLEEP button. "90" displays on LCD.
- The system will remain on for 90 minutes, then turn off into standby mode automatically.
Antenna
- To decrease the time in 10-minute-increments, press the SLEEP button and hold until the
desired time is set. For best FM reception, extend the wire antenna located at the back of the unit.
- The SLEEP time will be displayed for about 3 seconds, then go back to original display. Move it around until you get the best FM reception.
There is a built in ferrite antenna for AM signal. Move or rotate your Main Unit
to obtain the best AM reception.
10